Page 3
CalcFeeder PRO Controller
1. Decreasing flow effluent button.
2. Increasing flow effluent button.
3. Dosing pump “pause” button.
4. Settings menu button.
5. Optical sensor status indicator.
6. Solenoid valve status indicator.
7. Current controller working mode indicator.
1. Reset controller button.
2. ON/OFF automatic degassing button.
3. Automatic degassing settings menu button.
4. ON/OFF automatic alarm CO2 tank button.
5. ON/OFF standalone working mode button (when
turn ON pump is running without connected optical
sensor).
6. Reactor water refills manual mode enable button.
1. Manual enable degassing button.
2. Degassing setting once per week.
3. Degassing setting twice per week.
4. Degassing setting every day.
5. Degass Menu Exit button.
CalcFeeder PRO controller
Controller unit was designed to work with CalcFeeder PRO calcium reactor but it can be
used also as very precise feeding pump for each other brand Calcium reactor(require tur-
ning on Standalone mode to ON)
Include ultra-precise step motor pump with 4 rollers. Builtin LCD touch screen allow for very
easy flow adjustment. Firmware updates can be done by internal USB port.
Step motor allow for heavy duty work 24/7 without any limits. Please remember about re-
gular tubing inspections - used Pharmed BPT tubings have average 1000h lifetime and
need to be replaced after this time. Regular lubrications by grease extend tubing lifetime
and protect device against damage.
