Pacific Steamex TRIUMPH 1190 Скачать руководство пользователя страница 12

WARRANTY POLICY

PACIFIC STEAMEX INC. LIMITED WARRANTY

The  Pacific Steamex Inc. Triumph Carpet Extractor  has been manufactured, tested and inspected in accordance with specific engineering
requirements and is WARRANTED to be free from defects in workmanship and materials as follows:

Five (5) years parts, One (1) year labor – Polyethylene components.
One (1) year parts and labor – All other components unless excluded below.

This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with Pacific Steamex Inc.
Operating and Maintenance instructions.

This warranty does not apply to the following wear parts and accessories of the machine including:

Nor does it apply to damage or failure caused by improper use, abuse or neglect.  Warranty credit or replacement of return parts including
motors, pumps, etc., is subject to incoming inspection of those items.

To secure repair under this warranty, the following procedure should be taken:

The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges prepaid.  If
unable to locate the Dealer, you may contact Pacific Steamex Inc. at the address listed herein for the location of the nearest Pacific
Steamex
 Inc. repair center or agent or for other instructions pertaining to your warranty difficulty.

Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional charge or cost to the user.

Only Pacific Steamex Inc. or its authorized dealers and agents may make no charge warranty repairs on this product.  All others do so
at their own risk.

This warranty limits Pacific Steamex Inc. liability to the repair of the product and/or warranted parts replacement and does not include
incidental or consequential damages arising from the use of a Pacific Steamex Inc. machine whether defective or not.

This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.

PACIFIC STEAMEX, INC.

2259 S. SHERIDAN

MUSKEGON, MICHIGAN 49442-6252

1-800-968-1332

FAX 1-800-863-9536

06/01

215601

Part Number

908052
209750

S962P

A13013

3723
3689
3801

210901
210906
210904

3685

S626P
S280P

F920W

Part Name
Cord Assembly
Wheel
Jet Tip
Jet Tip
Belt
Brush
Brush
Carbon Brush
Carbon Brush
Carbon Brush
Intake Filter
Strainer
Strainer/Check Valve
Pump Out Hose

Содержание TRIUMPH 1190













Отзывы: