background image

N

IGHT

H

AWK

20”, 24” & 27”

PROPANE BURNISHERS

          O

 

PERATING & MAINTENANCE

INTRODUCTION                                 INSTRUCTIONS

READ THIS BOOK

This operator’s book has important information for the use
and safe operation of this machine.  

Read and understand

the Engine Operator’s Manual and this manual before
starting the machine.

  Keep this book and tell all opera-

tors to read the book.  

If you do not follow the instruc-

tions, you can cause an injury or damage equipment,
furniture or buildings.

For new books write to:
               

Pacific Steamex, Inc.

               2259 S. Sheridan
               Muskegon, MI  49442-6252

Carefully inspect all components to ensure that there is
no concealed freight damage.  If such damage is discov-
ered, file a “CONCEALED DAMAGE REPORT”
immediately with the delivering carrier.

The contents of this manual are based on the latest product
information available at the time of publication.  Pacific
Steamex reserves the right to make changes or improve-
ments to its machines without notice.

FOR YOUR CONVENIENCE, RECORD THE
MACHINE AND ENGINES MODEL AND SERIAL
NUMBERS HERE:

MACHINE MODEL______________________
MACHINE SERIAL NUMBER_____________
ENGINE MODEL________________________
ENGINE SERIAL NUMBER_______________

Содержание NIGHTHAWK 20

















Отзывы: