WARRANTY POLICY
PACIFIC STEAMEX
INC. LIMITED WARRANTY
The
Pacific Steamex
Inc. Dynamo/Triumph 440 Carpet Extractor has been manufactured, tested and inspected in accordance
with specific engineering requirements and is WARRANTED to be free from defects in workmanship and materials as follows:
Five (5) years parts, One (1) year labor – Polyethylene components.
One (1) year parts and labor – All other components unless excluded below.
This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with
Pacific
Steamex
Inc. Operating and Maintenance instructions.
This warranty does not apply to the following wear parts and accessories of the machine including:
Nor does it apply to damage or failure caused by improper use, abuse or neglect. Warranty credit or replacement of return parts
including motors, pumps, etc., is subject to incoming inspection of those items.
To secure repair under this warranty, the following procedure should be taken:
•
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges
prepaid. If unable to locate the Dealer, you may contact
Pacific Steamex
Inc. at the address listed herein for the location
of the nearest
Pacific Steamex
Inc. repair center or agent or for other instructions pertaining to your warranty difficulty.
•
Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional charge or
cost to the user.
•
Only
Pacific Steamex
Inc. or its authorized dealers and agents may make no charge warranty repairs on this product. All
others do so at their own risk.
This warranty limits
Pacific Steamex
Inc. liability to the repair of the product and/or warranted parts replacement and does
not include incidental or consequential damages arising from the use of a
Pacific Steamex
Inc. machine whether defective or
not.
This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.
PACIFIC STEAMEX, INC.
2259 S. SHERIDAN
MUSKEGON, MICHIGAN 49442-6252
1-800-968-1332
FAX 1-800-863-9536
03/01
245601
Part Number
908059
209771
244902
903009
3731
210905
243307
243301
248506
Part Name
Cord Assembly
Wheel
Jet Tip
Belt
Brush
Carbon Brush
Filter Intake Screen, Standpipe
Inlet Screen, Solution
Strainer, Inline
https://harrissupplyind.com - To Order Parts Call 608-268-8080
