Pacific Image Electronics Glite 965GW, Руководство пользователя, Страница: 8 / 20

INSTALLATION OF AMBER FILTER BOARD
Glite 965GW is equipped with an amber filter
board for green light protection and gel cutting
purposes. Open the lid and install the filter board
so the gel cutting task may be conducted.
1. Open the lid, cyan light will auto turn off
2. Lift the lid to its maximum open angle
3. Position the amber filter board with the hole
for hanging on lid in front (Figure 8) .
4. Place the amber filter board onto the filter
board hanging tab so the filter board may
hang as shown in
(Figure 9) .
5. When hanging on the lid, make sure the two
small rods on the filter board are placed
closely against the lid.
6. The installation is completed. One may turn
on cyan LEDs by “Scan button” for further gel
cutting purpose by using the provided gel
cutting knife.
Figure 8
Figure 9
Filter board hanging tab
Small rod
Amber Filter Board