background image

SKU 

93819

        

 For technical questions, please call 1-800-444-3353 

PAGE 3

93820

2. 

Do not operate power tools in explosive atmospheres, such as in the 

 

presence of flammable liquids, gases, or dust.  

Power tools create sparks  

 

 

which may ignite the dust or fumes.

3. 

Keep bystanders, children, and visitors away while operating a power tool.

 

Distractions can cause you to lose control.

ELECTRICAL SAFETY

4. 

Grounded tools must be plugged into a GFCI (Ground Fault Circuit    

 

 

Interrupter) outlet, properly installed, and grounded in accordance with all    

 

codes and ordinances.  Never remove the grounding prong or modify the    

 

plug in any way.  Do not use any adapter plugs.  Check with a qualified  

 

 

electrician if you are in doubt as to whether the outlet is properly grounded.

   

 

If the tools should electrically malfunction or break down, grounding provides a    

 

low resistance path to carry electricity away from the user.

5. 

Double insulated tools are equipped with a polarized plug (one blade is  

 

 

wider than the other).  This plug will fit in a polarized outlet only one way.  If  

 

the plug does not fit fully in the outlet, reverse the plug.  If it still does not    

 

fit, contact a qualified electrician to install a polarized outlet.  Do not   

 

 

change the plug in any way.

  Double insulation   eliminates the need for the    

 

three wire grounded power cord and grounded power supply system.

6. 

Avoid body contact with grounded surfaces such as pipes, radiators,  

 

 

ranges, and refrigerators.  

There is an increased risk of electric shock if your    

 

body is grounded.

7. 

Do not abuse the Power Cord.

  

Never use the Power Cord to carry the 

 

 

tool or pull the Plug from an outlet.  Keep the Power Cord away from   

 

 

heat, oil, sharp edges, or moving parts.  Replace damaged Power Cords    

 

immediately.

  Damaged Power Cords increase the risk of electric shock.

PERSONAL SAFETY

 

8. 

Stay alert.  Watch what you are doing, and use common sense when

 

operating this product.  Do not use the Fountain while tired or under the

 

influence of drugs, alcohol, or medication.

  A  moment of inattention while

 

operating this product may result in serious personal injury.

Содержание SUBMERSIBLE DIRTY WATER PUMP 93819















Отзывы: