manualshive.com logo in svg

Pacific Helmets F15, Информация пользователя

Поделиться
Скачать
Pacific Helmets F15 Скачать руководство пользователя страница 33

W W W . PA C I F I C H E L M E T S . C O M

33

CARE AND MAINTENANCE 

INSTRUCTIONS

It is important that you keep your protective helmet clean, free of 
contamination, and properly maintained at all times. Protective 
helmets that are dirty or contaminated pose significant hazards. The 
wearing of soiled or contaminated items can cause acute or long-term 
health hazards. Many contaminants can be absorbed by the skin, and 
some are carcinogenic. In addition, many contaminants are flammable 
and some are so minute that they cannot be seen with naked eyes. 
Do not wear your protective helmet unless it is properly cleaned and 
thoroughly dried. 

CLEANING AND DISINFECTION PRECAUTIONS

HELMET

•  Use only mild detergents with a pH range of not less than 6.0 pH 

and not greater than 10.5 pH as indicated on the product material 
safety data sheet (MSDS) or original product container. Do not 
use detergents or cleaning agents that are not approved by Pacific 
Helmets. Please contact us if in doubt. 

•  Never use solvents or chlorine bleach or cleaning agents 

that contain chlorine bleach. These substances rapidly 
break down some helmet materials. 

•  Do not machine wash using a regular washing machine or 

tumble dry whole helmets.

•  Do not wash protective helmets or other protective 

clothing alongside personal items. 

•  Do not dry clean your protective helmet

NECK PROTECTOR AND COMFORT PADDING

•  Separately clean helmet neck protector and comfort padding. 

Содержание F15

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды