Pacific energy Pacific VISTA, Руководство по эксплуатации, Страница: 14 / 20

14 220514-20
Troubleshooting
PROBLEM CAUSE CURE
GLASS IS DIRTY 1. Wood is wet - Use dry wood
2. Turning down air control - Do not turn down until:
too soon a) there is a good bed of coals
b) the wood is charred
3. Draft too low - Improper chimney height and/
or diameter
- Chimney plugged or restricted, check fl ue
- Provide outside air for combustion
4. Door gasket leakage - Replace gasket
- Check latch
EXCESSIVE CREOSOTE BUILDUP See 1,2,3, above.
LOW HEAT OUTPUT 1. Wood is wet - Use dry wood
2. Fire too small - Build a larger fi re
3. Draft too low - Chimney plugged or restricted.
Inspect and clean
STOVE WON'T BURN 1. Combustion air supply blocked - Check outside air supply for
obstruction
- Check that room air cover is
removed
2. Draft too low - Chimney plugged or restricted
Inspect and clean
- Chimney oversized or otherwise
unsuitable, Consult dealer
Appendix A