16
ALT5.ASCINSB 150714-24
©PACIFIC ENERGY FIREPLACE
PRODUCTS LTD.
2) Disconnect fan wires as shown in Fig #16 from appropriate
fan that is being replaced. Remove Thermal switch if needed.
(Fig #17)
3) Remove the two screws securing the fan bracket to the stove
using a 7/16” socket or wrench. Reverse steps 1&2 to install
new fan.(Fig #17)
sliding it under the surround top, and settling it over the fan
shields. (Fig #14).
9) Be sure to engage fan shield tops in the slots on the underside
of the cast decorative top. (Fig. #15)
Fan Removal/Installation
1) Remove Decorative Top and both Fan shields as specifi ed in
“Fan Speed Control Relocation” section on page 11.
Fig. # 16
SCREWS
THERMAL
SWITCH
SLOT
AIR INLET
Fig. # 14
Fig. # 13
SURROUND
SIDE
Fig. # 15
Fig. # 17
