9
Routine Maintenance
The system should be checked at least once a year depending on conditions. Systems located in
corrosive or coastal environments should be checked more frequently.
Check that all the mountings are secure and free from damage and corrosion. Replace parts where
required.
Check that the tripod is still vertically aligned and there is no damage to it and the bolts are tight.
Check the sensors and solar panels are orientated correctly, cables, connectors, sensors and solar
panels are clean and undamaged.
Dismantle the tipping bucket clean and test.
Replace humidity sensor in the Weather Sensor. Available from PDSA. Part No. PDS-WX-RH-
MODULE
Check the logger and connectors is clean and free from damage and there has been no sign of water
or insect damage.
Ensure any vents are clean.
Check condition of the battery and replace if weak. Part No. FED-RM12-12DC
Check the connection to the SatVUE Weather Portal and all the parameters are being logged.
If you require further assistance, please contact (+617) 3361 2000 or [email protected]
All brand and product names are trademarks or registered trademarks of their respective owners.
Note
Information found within this manual is subject to change without notice. Screen images and
hardware shown may vary slightly from actual product.
©2020 Pacific Data Systems Australia Pty Ltd. All rights reserved.
