20
DPM-RT-2 Operating Manual
5.2.6
View Test Results
Viewing a Test Result will present the user with a summary of the test results, this includes any vehicle
information associated with the results as well as the minimum, average and maximum values for the
separate periods within the test.
During a
Stall Test
or
Free Accelleration Test
, the operator is required to operate the piece of equipment
under test and move the throttle from the idle position to the full throttle position and back again. In the
Stall Test this is only done once, but in the Free Accelleration Test this is done multiple times. The
Continous
Test
does not have these idle and full throttle periods, therefore it will only show results under the
Whole
Test
column.
5.2.7
Graph Test Results
Graphing a Test Result will present the user with a plot of the test results as well as any vehicle information
associated with the results. This gives the operator a quick visual representation of the test results to allow
them to make decisions on the requirement maintance of the piece of equipment on the spot or from a
remote location via WiFi.
