background image

9

                ADL Vantage/ADL Vantage Pro/ADL Vantage 35

Introduction

This manual describes how to set up and use the Advanced Data Link (ADL) Vantage

®

Vantage Pro radio or ADL Vantage 35. The radios are advanced, high speed, wireless 
data links that are designed specifically for GNSS/RTK applications, but are also 
appropriate for many other applications requiring digital data links. Your success in 
using the radios is Pacific Crest’s primary goal. Pacific Crest stands behind its products 
by providing expert support and service. Your comments and questions are welcome.
This guide provides information concerning the use of the following radios:
•  ADL Vantage

Model numbers ADLV-1 (390 to 430 MHz) and ADLV-2 (430 MHz-470 MHz)

•  ADL Vantage Pro 

Model numbers ADLP-1 (390 to 430 MHz) and ADLP-2 (430 MHz to 473 MHz)

•  ADL Vantage 35

Model numbers ADL35-1 (390 to 430 MHz) and ADL35-2 (430-473 MHz) 

This guide is written for the first-time user and gives details concerning system setup, 
operation, and maintenance. We urge you to take the time to review this short manual 
completely before you set up the system.

Note about this guide

We believe that the ADL systems provides the best value and performance for the user. 
As such, we provide our equipment in complete turnkey systems, including all of the 
items necessary for operation with your GPS.
You may have purchased this radio from a third-party supplier. On occasion, the 
bundled product provided by these sources may differ from the kits provided directly 
from Pacific Crest. If this guide does not accurately reflect the equipment that you 
received, please contact your supplier for specific instructions concerning the setup of 
items that differ.

Technical Support

If you have a problem and cannot find the information you need in the product 
documentation, contact your local dealer or go to the Support area of the Pacific Crest 
website (

www.pacificcrest.com/support.php

). Product updates, documentation, and 

any support issues are available for download.
If you need to contact technical support, email 

[email protected]

Your Comments

Your feedback about the supporting documentation helps us to improve it with each 
revision. Email your comments to 

[email protected]

.

Содержание ADL Vantage Pro


































Отзывы: