4
Assembly
2
Attaching leg connector bracket
B
A
DD
AA
CC
1
Attaching
t
able legs
□
Place the table top (A) upside down on a flat, smooth
surface.
□
Align the table legs (B) to the table top.
□
Attach
table legs to the table top with
washers
(CC)
and bolts (AA) using the hex wrench (
EE
).
□
Do not fully tighten bolts until the end of Step 2.
C
B
CC
AA
DD
□
Align leg connector bracket (C) to the four table legs (B).
□
Attach the leg connector bracket to table legs with
washers (CC) and bolts (
AA
).
□
Once all bolts (AA) are in place. Fully tighten all
the bolts
using hex wrench
(EE)
.
□
Cover all the bolts with bolt caps (
DD
).
3
Stabilizing the table
IMPORTANT:
Please always have an umbrella base ready
if you plan to set an umbrella in the center of the table.
CAUTION:
You must remove the umbrella from the table when not in use. Failure to do so may result
in damage to the table top. This type of damage is not considered under the limited warranty.
