1. Attaching armrests to the seat and back panel
Fully tighten all the bolts once all of them are in place.
Cover all the bolts (E) /(F) with bolt caps (H).
Turn the chair upright and attach the headrest (I) to the top of the back.
Place the armrest (A) on its side on a flat, smooth surface.
Attach the cross bar (D) to the tab of the armrest (A) with washers (G) and bolts (E) using
hex wrench (J).
Attach the seat and back panel (C) to the armrest (A) with washers (G) and bolts (E) /(F) using
hex wrench (J).
2. Attaching bolt caps
