1
2
Remove the glass from the table rim and
put the glass aside.
Place the table rim (A) upside down on a
flat, smooth surface.
Attach each table leg (B) to the table rim
(A) with four washers (F) and four bolts
(E) using hex wrench (C).
Fully tighten all the bolts once all bolts are
in place. Cover all bolts with bolt caps (D).
Turn the frame upright.
Set the glass (H) in the table rim.
3
Warning
：
Please always have an umbrella base ready
when you plan to set an umbrella in the center
of the table.
Failure to do so will possibly damage the table.
Warning
：
Please always close the umbrella or remove
it from the umbrella base if the umbrella
will not be in use.
D
E
F
B
A
H
