1450 First Ave.
Page 4 of 5
Chippewa Falls, WI 54729
(800) 283-1141 or (715) 723-1141
Fax: (715) 723-7890
PT2000-PT2100 User Manual
Pacer Instruments, Inc
Rev 1.0
www.pacer-instruments.com
11-Aug-2007
Phone: 1-800-283-1141
SECTION 2 – OPERATION
Assure that unit is OFF. Attach type K probe and install battery (if none is present). The switch
position to the left is OFF; center position is ON in the LOW RANGE and to the right is ON in
the HIGH RANGE. Hold the probe tip at the location to be measured. The K-type thermocouple
is located at the tip. If the temperature being measured is over range (see SPECIFICATIONS), a
“1” will be displayed with the other digits blinking.
NOTE: On both units “LO BATT” indicates a low battery. Change (or charge) the battery.
APPENDIX A –PROBES
MODEL
TEMP RANGE
RESPONSE
TK101 Immersion 1.5x130mm 1650ºF/900ºC
6 sec
TK101/300 “ 1.5x300mm “
“
TK102
“ 3.0x130mm 2000ºF/1100ºC
12 sec
TK102/300 “ 3.0x300mm “
“
TK103 Surface 130mm
1652ºF/900ºC
2.3 sec
TK104 Air 130mm
1112ºF/600ºC
2.6 sec
TK105 Surface RA 130mm
842ºF/450ºC
8 sec
TK106 Needle tip 130mm
1100ºF/600ºC
12 sec
TK107 Clamp-on
392ºF/200ºC
8 sec
TK109 Flexible-wire 1000mm 900ºF/480ºC
0.9 sec
TK111 HD surface 130mm
842ºF/450ºC
8 sec
TK115H Ladle type lance – straight tip
TK115L Furnace type lance - 90º tip
TK115T-8” Foundry lance tip
TK115T-12” Foundry lance tip
TK115T-24” Foundry lance tip
TK119 Frozen food – screw tip
392ºF/200ºC 18 sec
