™
By Miltronics Mfg. Svcs., Inc.
Phone: (603) 352-0187
95 Krif Road EFax: (603) 352-7649
Keene, NH 03431 USA [email protected]
DA400 User Manual, PN 10075 Miltronics Mfg. Svcs., Inc.
Rev 3.5, 01-Aug-2019
www.pacer-instruments-usa.com
Page 20 of 28
APPENDIX F – RS232 COMMUNICATIONS (IF EQUIPPED)
If the instrument is equipped with the RS232 Communications option, there will
be a three pin male connector on the bottom of the instrument. Also, an RS232
cable will be included with the instrument. This cable will have a three pin
female connector on one end and a DB9 Female connector on the other end.
RS232 Data Output – Instructions for Use
STEP 1: Connect the RS232 cable (included) to the female connector on the
bottom of your instrument. Connect the other end to an RS232 port
on your computer.
STEP 3: Turn the Instrument ON.
STEP 4: Verify that the Instrument has been set up as a RS232 Serial Port
with a unique COM port number. (You only need to do this once).
For Windows users, open the Windows Device Manager (found in
Control Panel) and verify that a serial port exists.
You are now ready to capture the data being measured by your
instrument.
Please refer to
Appendix G – Viewing and Capturing Data
for
further instructions.
