background image

©2004 PACE Inc., Annapolis Junction, Maryland 

Page 10 of 11 

All Rights Reserved 

“SODRTEK by PACE” LIMITED WARRANTY STATEMENT 

 

Limited Warranty

 

Seller warrants to the first user that products manufactured by it and supplied hereunder are free of 
defects in materials and workmanship for a period of one (1) year from the date of receipt by such user.  
Monitors, computers and other brand equipment supplied but not manufactured by PACE are covered 
under their respective manufacturer’s warranty in lieu of this Warranty.   
This warranty does not cover wear and tear under normal use, repair or replacement required as a result 
of misuse, improper application, mishandling or improper storage.  Consumable items such as tips, 
heaters, filters, etc. which wear out under normal use are excluded.  Failure to perform recommended 
routine maintenance, alterations or repairs made other than in accordance with Seller’s directions, or 
removal or alteration of identification markings in any way will void this warranty. This warranty is 
available only to the first user, but the exclusions and limitations herein apply to all persons and entities. 
SELLER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAKES NO WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
Seller will, at its option, repair or replace any defective products at its facility or other location approved by 
it at no charge to user, or provide parts without charge for installation by the user in the field at user’s 
expense and risk.  User will be responsible for all costs of shipping equipment to Seller or other location 
for warranty service. 
EXCEPT FOR THE REMEDY ABOVE DESCRIBED, UNLESS OTHERWISE REQUIRED BY 
APPLICABLE LAW, SELLER WILL HAVE NO OTHER OBLIGATION WITH REGARD TO ANY BREACH 
OF WARRANTY OR OTHER CLAIM WITH RESPECT TO THE PRODUCTS, OR LIABILITY FOR ANY 
DIRECT, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL LOSS OR DAMAGE CAUSED BY OR 
OCCURRING IN CONNECTION WITH ANY OF THE PRODUCTS. 
Warranty service may be obtained by contacting the appropriate PACE Company or local Authorized 
PACE distributor as set forth below to determine if return of any item is required, or if repairs can be made 
by the user in the field.  Any warranty or other claim with respect to the products must be made with 
sufficient evidence of purchase and date of receipt, otherwise user’s rights under this warranty shall be 
deemed waived. 
For PACE USA Customers: 
 

PACE, INCORPORATED 
9030 Junction Drive 
Annapolis Junction, Maryland 20701 
Tel.  301-317-3588  
FAX.  301-498-3252 

 
For PACE EUROPE Customers: 

 
PACE EUROPE LIMITED 
Sherbourne House, Sherbourne Drive,  
Tilbrook, Milton Keynes 
MK7 8HX 
United Kingdom 
Tel.  (44) 1908 277666  
WARRANTY SERVICE FAX: (44) 1908 277 777 

All other Customers: 
 
Local Authorized PACE Distributor 

Содержание Sodrtek HW50












Отзывы: