Complete Radio Replacement Kit with
Vehicle Information Retention for
Select 11-Bit GMLAN Vehicles
RPK4-GM2301
Pacific Accessory Corporation
Rev. 072517
Page 5
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Single DIN with Pocket
1. If installing this kit into a Chevrolet Cobalt, remove the shaded areas (A) at the
top of the mainframe.
2. Attach left and right mounting brackets to the kit as shown in Fig C.
3. Insert pocket into lower section of kit from the rear & lock into slots of
mounting brackets as shown in Fig. C.
4. Insert ISO mountable radio between ISO mount brackets and loosely attach
to sides of radio using screws provided with radio when possible, or screws
supplied with kit.
5. Slide the radio forward or backward for desired look and tighten the screws.
6. Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio (Optional).
7. Mount the PAC-LCD in the glove box or center console area using the
supplied cable.
8. Connect all necessary cables to the back of the radio and insert the dash
kit and radio combo into the dash and secure it using the (4) 9/32 screws
removed during removal of the factory radio.
A
A
Fig. C
Single DIN with LCD adapter bracket
1. Slide the LCD into the adapter bracket from the rear and secure it using the
supplied back plate and screws shown in Fig. D.
2. If installing this kit into a Chevrolet Cobalt, remove the shaded areas (A) at the
top of the mainframe shown in Fig. E.
3. Attach left and right mounting brackets to the kit as shown in Fig E.
4. Insert LCD adapter bracket into lower section of kit from the rear & lock it into
the slots of mounting brackets as shown in Fig. E.
5. Insert ISO mountable radio between ISO mount brackets and loosely attach
to sides of radio using screws provided with radio when possible, or screws
supplied with kit.
6. Slide the radio forward or backward for desired look and tighten the screws.
7. Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio (Optional).
8. Connect all necessary cables to the back of the radio and insert the dash
kit and radio combo into the dash and secure it using the (4) 9/32 screws
removed during removal of the factory radio.
A
A
Fig. D
Fig. E
Dash Kit Assembly
There are three configurations for installing this kit which will be covered in this section.
Double DIN
1. Remove the shaded area (A) from both the left and right mounting brackets
(Only the left bracket is shown in Fig. A to the right). Next, if installing this
kit into a Chevrolet Cobalt, remove the shaded areas (B) at the top of the
mainframe.
2. Attach left and right mounting brackets to the kit as shown in Fig B.
3. Insert ISO mountable radio between ISO mount brackets and loosely attach to
the sides of radio using screws provided with radio when possible, or screws
supplied with kit.
4. Slide the radio forward or backward for desired look and tighten the screws.
5. Attach a rear support bracket to the rear of the new radio and adjust as
necessary to support the weight of the radio (Optional).
6. Mount the PAC-LCD in the glove box or center console area using the
supplied cable length.
7. Connect all necessary cables to the back of the radio and insert the dash kit
and radio combo into the dash. Secure it using the (4) 9/32 screws removed
during removal of the factory radio.
A
B
B
Fig. B
Fig. A