PAC MMC200, Руководство по эксплуатации

Страница: 7 / 16

Model MMC200 Multi-Material Cutter Model MMC200 Multi-Material Cutter
prompt for a unit of measure or for the length cor-
rection factor), a long beep will sound that is dis-
tinctly longer than the confirmatory beep heard af-
ter each key press. Also, if the value entered is out
of range or isn’t acceptable as an input for that
parameter (e.g. to enter more than 99,999 inches
as a length, to use more than 1 decimal point, etc.)
a letter appears in the lower right corner of the dis-
play indicating the error:
UNITS in #1
CUT LENGTH 0.0
LENGTH ADJUST 0
QUANTITY 0 R
A legend to determine the cause of the input is
given below:
INPUT ERROR DIAGNOSTIC LEGEND
In general, an <ENTER> key press advances to
next parameter, a <RUN> key press jumps over
items on the current screen and advances to the
next screen or menu and an
<ESC/PAUSE> key
press returns back to the previous screen. Also,
when editing an existing batch parameter, an
<ENTER> key press is necessary to re-write a
new value into memory. A <RUN> key press sim-
ply advances to the next screen without over writ-
ing the old value.
Once the feed rate is decided, press the <ENTER>
key to advance to the batch start screen:
JOG - JOG
CUT - CUT
MAIN MENU - ENTER
START
- RUN
This menu allows several options: to run a test
piece, to cut a piece, to enter the newly created
batch parameters into memory without running the
batch and to run the batch. If the operator chooses
to run some test pieces before commencing the
batch, press the
<JOG> key and the manual pro-
cess screen comes up:
MANUAL PROCESS
LENGTH: 0.0
ABORT -ESC
This screen looks like the manual mode screen
but has a subtle difference. When the
<JOG> or
<+> keys are pressed, the wire or tubing will trans-
port the cut length parameter. If 5.0" was entered
as a cut length, 5" of material would move through
the machine and 5.0 would be displayed for a
length. Another
<JOG> key press would again ad-
vance 5 inches of material through the machine
and 10.0 would be displayed as the length. When
the
<CUT> key is pressed, the cut mechanism
activates and the length is reset to zero.
If the start option is selected (a <RUN> key press),
a batch run screen is displayed:
PIECES XXXX #1
PIECES LEFT XXXX
ESC TO STOP/BREAK
RUN TO CONTINUE
The first line indicates the quantity parameter and
the current batch number and the second line in-
dicates a running count of the pieces left to pro-
cess. The pieces left count is decremented after
each piece is cut. When a batch is successfully
completed, a batch completion screen appears:
RUN COMPLETE #1
PIECES LEFT 0
PUSH ANY KEY
This screen indicates a successful completion of
a batch and the batch number. A key press brings
the main batch select menu back to the screen.
RUNNING AN EXISTING BATCH
Once a set of one or more batches are created, a
batch may be started with a little as three key
ERROR INDICATOR Explanation
R Data out of range.
D An extra decimal point.
W A decimal only was entered as an input.
N
Nothing to delete. Back Space key
pressed too many times.
L Length out of range.
F Too many decimal places.
Production Automation • Eden Prairie, MN USA • Ph: 888-903-0333 • info@gotopac.com • www.gotopac.com • Fax 952-903-0315