Reverse Camera Input and Navigation Unlock
Interface for Chrysler / Dodge / Jeep / RAM Vehicles
BCI-CH41
(v2)
© 2018 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
PAC-audio.com
Pacific Accessory Corporation
Rev: V3
Date: 040918
Page 7
Feature
Option
Description
Notes
Reverse/Font
On-Demand toggle switch will activate the Reverse or
Front cameras
Left/Right
On-Demand toggle switch will activate the Left or Right
cameras
Double tap turn signal
This will activate the camera input when you double tap
the turn signal within 2 seconds.
Turn Signal
This will activate the camera input whenever a turn signal
is on.
Turn signal and moving above xMPH
This will activate the camera input when a turn signal is
active and the vehicle is going faster than the designated
number.
Greater than 0MPH and less than xMPH
This will activate the camera input whenever the vehicle is
going faster than 0 mph or less than the designated
number.
Manual Only
This will allow you to activate the camera input manually
by using the on-demand activation toggle switch or the
forward arrow on the SWC.
Front Park Assist
This will activate the camera input whenever the front
park assist warning system is activated
You must trigger the front park assist before this feature will show up in
the menu.
This feature is not available in the Chrysler 300 or Dodge Charger.
On when shift into D until 6MPH or 30 seconds
This will activate the camera input whenever the vehicle is
placed into Drive. The camera input will turn off once the
vehicles MPH is faster than 6MPH, or after 30 seconds.
This mode will not work in vehicles with a manual transmission.
On when shift out of R until 6 MPH or 30 seconds
This will activate the camera input whenever the vehicle is
shifted out of reverse. The camera input will turn off once
the vehicles MPH is faster than 6MPH, or after 30
seconds.
This mode should only be used in vehicles that have a manual
transmission.
Feature
Option
Description
Notes
Nav Unlock
Off/On
Turns the navigation unlock feature off or on.
Once this has been turned on you will still need to activate it by using the
back right SWC.
Accessory
This will provide a 12v+ trigger whenever the key is in the
accessory or run position.
This is the default setting for Prog Out 1.
Any Camera Active
This will provide a 12v+ trigger whenever any camera is
triggered.
Reverse Camera Image
This will provide a 12v+ trigger whenever the vehicle is
placed in reverse or the reverse camera is forced on using
the SWC or the on-demand activation toggle switch.
Reverse Gear
This will provide a 12v+ trigger whenever the vehicle is
placed in reverse.
Accessory
This will provide a 12v+ trigger whenever the key is in the
accessory or run position.
Blind Spot
This will provide a 12v+ trigger whenever the blind spot
camera is activated.
Forced Reverse Camera Image
This will provide a 12v+ trigger whenever the reverse
camera is forced on using the SWC.
Front Camera Active
This will provide a 12v+ trigger whenever the front
camera is activated.
Reverse Camera image
This will provide a 12v+ trigger whenever the vehicle is
placed in reverse or the reverse camera is forced on using
the SWC.
Reverse Gear
This will provide a 12v+ trigger whenever the vehicle is
placed in reverse.
Off
This is the default setting for Prog Out 2 & 3.
Swap Source & Preset SWC
On/Off
This will allow you to swap the Source and Preset SWC
around.
Vehicle must be equipped with audio SWC on the back of the steering
wheel.
Swap Track and Volume SWC
On/Off
This will allow you to swap the Track and Volume SWC
around.
Vehicle must be equipped with audio SWC on the back of the steering
wheel.
Remote Start Restore Climate
On/Off
This will restore the climate controls to the last known
setting on remote start.
Vehicle must be equipped with remote start.
ECO Memory
On/Off
This will force the vehicle to remember the ECO mode
setting once the vehicles key has been cycled.
Only available in the 2014 Dodge Durango and Jeep Grand Cherokee.
Start/Stop Memory
On/Off
This will force the vehicle to remember the Auto
Start/Stop mode setting once the vehicles key has been
cycled.
Only available in vehicles equipped with Auto Start/Stop system.
Must turn Auto Start/Stop feature on/off before it will appear in the BCI
menu.
Sport Mode Memory
On/Off
This will force the vehicle to remember the Sport mode
setting once the vehicles key has been cycled.
Only available in vehicles equipped with Sport Mode.
Must turn Sport Mode on/off before it will appear in the BCI menu.
EQ Presets
On/Off
This will give you 3 user programmable presets for the
factory EQ.
See page 4 of instruction manual for operation. This will only show up if
the vehicle is equipped with a factory amplified system.
Prog Out 2 & 3
Available BCI-CH41 Features
Camera Settings
Blind Spot Camera
Front Cam
Interface User Options
Prog Out 1
Toggle Switch
If navigation is being used and the camera input is engaged UNDER 20
MPH, it will affect the navigation guidance until the camera input is
switched off.
BCI Feature Setting Menu
