© 2024 Stinger. All rights reserved. PAC is a Power Brand of Stinger.
PAC-Audio.com
Pacific Accessory Corporation
Page 6
Rev: V1
Date: 020924
Advanced Subwoofer Amplifier Interface
for Select Chrysler / Dodge / Jeep / RAM Vehicles
APSUB-CH42
Troubleshooting
Technical Support
1.
Low volume setting on radio is too loud - Set the minimum volume using process outlined in Setup and Configuration, or using
the AmpPRO PC app.
2. I
f for any reason the APSUB module becomes unresponsive, or will not power up with the key on, you can reset the
interface
by turning the key to the ignition position, then pressing and holding the Volume Down button on the factory steering wheel
controls for 12 seconds until a tone is heard, or by pressing and holding the reset button on the side of the APSUB module for
10 seconds (until the LEDs alternate flashing red).
LED Legend
LED 1
Action/Color
During Normal Operation
Solid Red
Module Active
Solid Amber
Minimum Volume Adjustment Mode
Rapid Blink Any Color
DSP Activity
LED 2
Blinking Amber
USB Connection Detected
Both LEDs
Alternate Blinking Red
Performing Memory Reset
Email:
Phone:
727-592-5991
Chat:
PAC-Audio.com