CIRCA WALL
pg. 15
1
PARTS LIST
CIRCA WALL
ASSEMBLY INSTRUCTIONS
2
3
SCREW LAMP ARM TO THE MOUNTING PLACE WITH
THE FOUR MACHINE SCREWS PROVIDED
4
USE THE MOUNTING PLATE AS A TEMPLATE FOR
MARKING THE LOCATION OF THE WALL ANCHORS
MARK THE CENTER OF ALL
FOUR HOLES AS SHOWN
PLACE THE MOUNTING PLATE
IN THE DESIRED LOCATION.
MAKE SURE TOP IS LEVEL
REMOVE THE PLATE FROM THE WALL AND INSTALL
ALL FOUR WALL ANCHORS
TAP THE UNTHREADED TIP
OF THE ANCHOR INTO THE
WALL
USE A PHILLIPS SCREWDRIVER
TO COMPLETE THE ANCHOR
INSTALLATION
THIS SURFACE SHOULD
BE FLUSH WITH THE WALL
NOTE ORIENTATION
OF MOUNTING PLATE
ROUTE CORD AS SHOWN
SCREW THE MOUNTING PLATE TO THE ANCHORS
WITH THE SCREWS PROVIDED
A. LAMP HEAD
B. FACEPLATE
C. 4x MACHINE SCREWS
D. LAMP ARM
E. 4x SCREWS
F. MOUNTING PLATE
G. 4x WALL ANCHORS
A
F
E
G
B
C
D
