
1
2
INSTRUCTIONS FOR USE AND CARE
ADJUSTING THE HELMET
Loosen the helmet headband by rotating the ratchet knob (6) counter-clockwise. Place the helmet on
the head and rotate the ratchet knob (6) clockwise to adjust the size. The headband should be tight
around the crown of the head, but still comfortable. To secure the helmet on the head, connect the
two ends of the chinstrap (7) and insert one piece of the buckle into the other. The buckle is locked
when you hear a click. Adjust the straps under the chin and on the cheeks; pull or loosen the straps to
get a firm but comfortable fit. Fix the loose end of the strap with the appropriate plastic rings. To
facilitate this step, unfasten the chin strap and remove the helmet from the head.
To remove the helmet from the head, loosen the headband by rotating the ratchet knob (6) anti-
clockwise, unfasten the buckle by pressing the red tab (7), and remove the helmet from the head.
USING THE ACCESSORIES
Adjusting the visor PAB Fire 05
The helmet is equipped with a face guard (2) PAB FIRE 05 (available in versions CLEAR
or
GOLD) that
meets the requirements of European standard EN 14458:2018 and is intended to protect the
wearer’s eyes and face from flying particles, dust, and splashes of liquids.
When not needed, the visor
is stored in standby position under the helmet’s s
hell. To move the visor
into in-use position, pull it down over the face until you hear a click sound. When the visor is not
needed anymore push it back under the shell into stand-by position.
Adjusting the eye guard Goggles 05
Eye guards will offer little or no protection to substantial areas of the face. They should only be used
where an adequate risk assessment indicates that facial protection is not required.
The eye protector is intended to protect the wearer’s eyes from flying particles, dust and splashes of
liquids.
When not needed the eye guard (3) is stored in stand-
by position under the helmet’s shell. To move
the eye guard into in-use position pull the tabs on the bottom part of the goggles and adjust their
position. To move the goggles back into stand-by position push them up under the helmet shell.
The visor PAB FIRE 05 in versions CLEAR
or
GOLD
a
nd the eye-guard Goggles 05 have been
designed and developed for and are designated for use with helmet model PAB FIRE 05.