OWNERS MANUAL
Congratulations on the purchase of your bathtub!
ECOPLUS
Please read and follow all the instructions contained in this Owners Manual before installing your bath-
tub. In addition, you should refer to these instructions during the life of your bathtub.
Instruction for bathtub installation
Only a qualified serviceman should perform the installation of your bathtub.
Preparation of area
As the front panel of the tub must be freely moved either during the installation or exploitation, choose the right
area in which to install the bathtub.
Prepare the floor and walls before installation works. The corner in which the tub will be installed, as well as the
walls must be in straight angle against to floor to avoid possible gaps between tub and wall.
The place under the tub must be in the same level as the floor.
All drain connections should fit in between bathtub and its legs (see the drawing).
The centre of drain is pointed in the drawing. Before assembling connections check the inlet of drainage (Ø 50
mm); it must be either in the same level or maximum 50 mm from the floor and not closer within a radius of 200
mm from the centre of bathtubs drain outlet (see the drawing).
Upon receipt, immediately inspect the bathtub to make sure the unit has shipped as ordered and
has arrived undamaged.
If a problem is discovered, call your PAA dealer immediately.
Handling damages are not covered under warranty.
max 20 mm
pic.
a
C
D
pos. C2
pic.
b
C2
C3
C1