PA 1P1BF27, Руководство пользователя

Страница: 6 / 30

Reversing the Door
The side at which the door opens can
be changed from the right side (as
supplied) to the left side, if the
installation site requires.
Tools you will need
1. 8 mm (0.315 inch) socket driver
2. Philips head screw driver
3. Putty knife or flat head screwdriver
8
5
1. Remove the upper hinge cap (1 ).
2. Using a sharp object, pry out the
plug buttons (5).
3. Remove the two Phillips screws (2)
that connect the upper hinge (3)
on the right side of the cabinet top.
4. Carefully lift the door and place it
on a padded surface to prevent it
from scratching.
5. Remove the plug (9) and transfer it
to the uncovered hole at the right
side. Be sure to press the button
firmly into the hole. Remove the
two bolts (7) that hold the lower
hinge (4) on the right side.
6. Remove the screw-type leveling
front leg (8) and transfer it to the
right side as shown in the figure
below.
7. Set the door into its new place
making sure the pin enters the
bushing at the lower frame section
(hole).
8. Secure the upper hinge (3)
previously removed in step 3 on
the left side. Make sure the pin
enters the bushing at the upper
frame section (hole).
9. Loosely secure the lower left hinge
(4) and do not tighten the bolt until
the door is in the closed position
and leveled.
10. Inset the plug buttons (5) on
the uncovered holes (right side).
11. Replace the upper hinge cap (1)