6
5.
Full battery charge
Medium-level battery
charge
Low battery
Battery Status Indication
1.
Connect the camera to the computer or charger with the USB cable to charge your
camera. The charge indicator lights up, indicating that your camera is being
charged. The indicator will turn off automatically after the charging is complete.
7
2.
If the battery charge is low, a message "Low Battery" displays on the screen. A few
seconds later, the camera will be powered off automatically.
Note:
•
When the camera is powered off or the battery is removed, the photos and videos
saved in the internal memory will be lost.
•
It is recommended to export the photos and videos saved in the camera to the
computer periodically.
•
To extend the service life of the camera, if it will not be used for a long term, remove the
battery from it.
•
Inserting SD Card
8
An SD card of up to 64G capacity (not supplied) shall be inserted into the camera to
extend the memory, save more photos and videos and export them to your computer.
The files saved in the SD card will not be lost when the camera has low power or the
battery is removed.
1. Find SD card slot on the bottom of the camera.
2. Insert an SD card in the right direction as indicated.
3. Press the SD card until you hear a click. If the SD card is inserted properly, the edge of
the SD card will align with that of the camera.
Note: When an SD card is properly inserted, an icon will display on the LCD
screen, indicating that the SD card is correctly installed and that all the photos and
videos you take or shoot will be saved in the external SD card, rather than the
internal memory.
•
The camcorder supports a 64 GB SD card.
•
Formatting the SD card will permanently delete all the data saved in the SD card,
including those protected.
•
Do not remove the SD card during formatting, or the SD card might be damaged and
can never be used again.
•
Be sure to format the card with the camcorder.
9
DVR Function Instructions
To turn on the high-definition digital camera, you need to unfold the LCD
screen and then press the power button located on the inside of the DVR.
Power on
Press the power button or unfold the LCD screen to start the DVR.
The LCD screen will light up, indicating that the camera is ready for use.
Power off
Press the power button to turn off the DVR.
The DVR will turn off automatically if no operation is performed within 3 minute, 5 or
10 minutes.
If the battery charge is low, a message "Low Battery" displays on the screen. A few
seconds later, the camera
will be powered off automatically.
Capturing the Videos
10
Press the power button to turn on the camera. Then insert a 32 GB SD card for
normal operation.
Then the icon
will display at the right upper corner of the LCD screen.
1.
Press the Rec button to start shooting.
2.
The icon will display and start to flash, and the shooting time will display at the
right upper corner of the LCD
screen.
3.
Press the Rec button again to stop shooting.
4.
The recorded video will be saved as an MOV file.
Note:
1
. During shooting, you can adjust the focal length of the camera to focus on the
object you want to shoot.
2. You can check the MOV file in the Replay mode.
3. You can check the videos via video players on your computer after the files being
exported.
4. Insert a 64GB SD card to ensure normal operation.
5. If the internal memory is full, a message "Memory is full" will display on the LCD
screen when you attempt to shoot a video.
Insert an SD card with available spaces to shoot more videos.
11
Definition
In video mode, you can select the definition out of three options before capturing a video.
The higher the definition, the better the video quality, though better-quality videos require
larger memory.
1. Press the power button the turn on the camera.
2. Press the menu button or touch the MENU icon on the screen to access the menu.
3. Touch the screen definition icon.
4. Select the zoom in/out button or the corresponding icon on the screen to select a
definition: 1920 x 1080 (FHD/30fps), 1280 x 720 (HD/30fps), and 640x480 (VGA//30fps).
Note:
The selected definition icon will display at the right upper corner of the LCD screen.
White Balance
This function is used to adjust the color of the video based on the light.
1. Press the menu button or touch the MENU icon on the screen to access the menu.
2. Touch the screen and select the white balance icon.
3. Touch the screen and select
auto, daylight, cloudy, fluorescent or tungsten.
Color
1. Press the menu button or touch the MENU icon on the screen to access the menu.
2. Touch the screen and select the color icon.
3. Touch the screen and select standard, brown, black-and-white or real.
