P3 International Kill A Watt EZ P4460, Руководство по эксплуатации

Страница: 8 / 12

Installation:
1. Remove the protective film (if any) covering the LCD meter display by pulling
the tab marked “REMOVE BEFORE USE”.
2. Turn off the appliance and remove the power cord from the outlet. Connect the
Kill A Watt™ EZ unit to the outlet and the appliance to the unit. If the outlet is
in an inconvenient location first connect a quality extension cord that is rated
for the application.
3. Turn the appliance back on and confirm normal operation. If the appliance
does not function, please recheck your installation.
4. Press and hold the RESET key on the unit. After a few seconds, “rESt” will
appear momentarily on the LCD. Release the RESET key. This indicates that
previous measurements have been deleted and that the total accumulated
KWH, Elapsed Time and Cost measurements have been reset to zero.
Rate setting:
1. To accurately calculate the actual cost of electricity consumed and to project
future costs, first you must set your local utility’s electric rate into the unit. The
rate is typically charged as dollars (or cents) per kilowatt-hour (KWH). You can
find this rate on your last utility bill or you can contact the utility’s customer
service department to determine your rate. Some utilities charge two or more
rates depending on consumption, time of day, or season. Use the rate that
more closely reflects your actual use patterns, or average the two rates to suit
your needs.
2. Press and hold the SET rate key on the unit. “Rate” will be displayed and the
currently set rate will flash.
3. Press the UP and DOWN key to set your desired rate. If you hold the UP or
DOWN key, the displayed rate will rapidly change. The range of settings is
from $0.000 to $9.999. For example, if your utility charges you 10.6 cents per
KWH, set the rate until the unit displays $0.106.
4. Press the SET key again. “SAVE” will appear briefly in the display as the
desired rate is set. The unit will return to the Measurements mode.
Cost display:
1. To display the actual cost of power consumed or projected cost, press the
MENU key until “Cost” is displayed in the LCD.
2. Initially the actual total cost will appear. “Total” will be displayed. This dollar
amount represents the total cost of power consumed by the attached appli-