Page
9
of
14
Copyright © 2015 P2 Wireless Technologies Limited. All rights reserved.
WIRELESS ACCESS POINT USER MANUAL
SmartMoment—Configuring the AP
The Z100 comes with the built-in SmartMoment for basic configuration of the AP. To configure the AP,
connect it through wireless or wired method.
Connection Procedure
Wireless Method
1.
Power up the AP.
2.
Use a Wi-Fi-enabled device to connect to the SSID “P2MTWifi” with password “p2mtuser”.
3.
Open the browser and type the IP address “172.16.0.1”.
4.
Navigate to the top menu bar and click
Lightweight
under
Mode
.
Wired Method
1.
Power up the AP.
2.
Connect the AP and the PC with a LAN cable.
3.
Set the IP of the PC to “192.168.1.2”.
4.
Navigate to SmartMoment by “192.168.1.1”.
5.
Navigate to the top menu bar and click
Lightweight
under
Mode
.
Default Login Information
Username: p2mtadmin
Password: p2mtadmin
Note
SmartMoment Lightweight mode is for basic configuration
ONLY
. Use the advance mode for advanced
setting. For details, please refer to the SmartMoment User Guide.
