Copyright © 2016. P2 Wireless Technologies. All rights reserved.
Website:
www.p2wt.com
Email:
Tel: (+852) 3905 1880 Fax: (+852) 3695 0820
Install the mounting bracket and the X30 onto the pole with the U-shaped screw stem
(item 4). Tighten each end of the U-shaped screw stem (item 4) with a M8 hexagon nut
(item 1), a spring washer (item 2) and a flat washer (item 3) with a torque value of 12-15
Nm.
STEP 4: Adjust the Mounting Angle
There is a
±
30 degrees up/down tilt angle for the mounting bracket.
(1)
To adjust the up/down tilt angle, slightly loosen the hexagon bolts (item 1) and tilt
up/down the X30 to the desired angle, then tighten it again at a torque value of 12-
15 Nm.
(2)
To adjust the horizontal angle, loosen the M8 hexagon nuts (item 2) and slowly
adjust the angle of the bracket, then tighten it again at a torque value of 12-15 Nm.
-End of Quick Start Guide-
1
2
