Page
5
of
13
Copyright © 2015 P2 Mobile Technologies Limited. All rights reserved.
WIRELESS ACCESS POINT USER MANUAL
Possible Configurations
Explanation of Ports
Ports &
Connectors
Quantity and Specifications
1.
LAN Port
10/100/1000M Base-T Ethernet port (RJ-45), used as a WAN port and used for
being powered by PoE function.
2.
LED
LED
Function
State—Colour
Indication
RUN
AP Power /
Ready Status
Steady—Green
AP is ready.
Off
No power to AP.
LAN
Network Link
Status
Steady—Green
1000Mbps Ethernet link
negotiated.
Flashing
Ethernet link activity.
Off
Ethernet link unavailable.
Radio 0
Integrated
2.4 GHz
Radio Status
Steady—Green
Integrated 2.4 GHz radio is
enabled.
Off
Integrated 2.4 GHz radio is
disabled.
Radio 1
External 5
GHz Radio
Status
Steady—Green
External 5 GHz radio is enabled.
Off
External 5 GHz radio is disabled.
3.
External
Antennas
Connectors
Through the N-Type connector, the access point can be connected with various
types of antenna for optimized results of different deployment scenarios.
Note:
━
AP that is not set up according to the instructions in the user manual may malfunction.
━
The connection quality of the AP and Wi-Fi coverage vary with the actual environment.
━
Only use the mounting kits that is compatible with the AP.
━
Please refer to the network plan provided. Without adhering to the network plan may
result in a network failure.
━
For the best practice, please consult P2MT authorized engineers.
3
