Copyright © 2015. P2 Mobile Technologies Limited. All rights reserved.
Website:
www.p2mt.com
Email:
Tel: (+852) 3905 1880 Fax: (+852) 3695 0820
manual may malfunction.
━
The connection quality of the AP and Wi-Fi coverage vary with
the actual environment.
━
Only use the mounting kits that is compatible with the AP.
━
Please refer to the network plan provided. Without adhering to
the network plan may result in a network failure.
━
For the best practice, please consult P2MT authorized engineers.
3
Mounting
3.1
Pole Mounting Procedure(Pole Size: Ø40-52mm)
1.
Firstly install the L shaped
clamp, with M6 screw nut,
spring washer and flat
washer. Four screws need be
installed.
2.
Put the U shaped screw stem
and U shaped slot into the
hole. And then drive the M6
crew nut and M6 washer.
3.
Install the clamp on the back of the
AP, with M6*12 screw bolt, M6
spring washer and M6 flat washer.
Four screw bolts need be installed.
4.
Input M6*12 screw bolt and M6
washer into the hole on the back and
drive them.
5.
Finally mount the AP on the pole as
shown in the picture. And drive the
screw nut tight with wrench.
-End of Quick Start Guide-
