P1PE P6220C, Руководство пользователя

Страница: 3 / 32

QUICK START GUIDE
1. Apply chain brake.
2. Fill with fresh 2-stroke petrol and synthetic oil mixed at 40:1 ratio.
3. Fill chain lubricant chamber.
4. Pump primer bulb 6 times.
5. Switch ON/OFF switch to ON.
6. Pull out choke lever.
7. With chainsaw on the ground, put your right foot on rear handle to secure it.
8. Pull starter handle quickly.
9. After about 2-3 pulls the engine may fire slightly. If you continue to pull with
choke OUT it will flood the engine.
10. Push choke IN.
11. Pull starter handle quickly and chainsaw engine should start.
With a hot chainsaw, you may not need to use the choke. If it is warm, maybe half
choke.
Page 3