P+S Technik Weisscam HS-1, Руководство оператора

Страница: 53 / 66

DOP STUFF >> J|3
OPERATOR‘S GUIDE BOOK
Crop Factor
If you work with 35mm PL mounted film lenses or with still photography
mounted lenses, you have to calculate with different crop factors. Here
are the different diagonals:
Source Image Size Diagonal
35mm film 24 x 18 mm 27,5 mm
WEISSCAM HS-1 sensor 15 x 12 mm 19,5 mm
For 35mm PL mounted lenses you have to multiply the focal length
with a factor of 1.4. This is based on full sensor use.
->
a 50mm film lens is approx. a 70mm lens on the
WEISSCAM HS-1
->
a 50mm still photography lens is approx. a 70mm lens on
the WEISSCAM HS-1
The normal focal length lens for WEISSCAM HS-1 is 25mm.
->
You cannot mount 16mm film lenses on the WEISSCAM
HS-1, because the lens will not light the whole sensor.
->
You cannot mount 2/3” lenses, because these will not light
the whole sensor
Lightweight Support
The camera body fits onto the Sony VCT 14 quick release tripod
adaptor without additional adapters. But you cannot use the Chrosziel
lightweight support with the camera and then put it onto the Sony VCT
14 plate. For 15mm rods, you have to use the Arri lightweight support
LWS-3 or LWS-4. The camera body is equipped with the appropriate
accessory shoe.
Bridge Plate
The adapter plate for 35mm bridge plates is part of the Weisscam HS-
1 delivery content. You can screw it onto the camera bottom. With the
adapter plate, you are able to work with standard 35mm bridge plates
(i.e. Arri BP-5 used for ARRI 535 camera) and 19mm rods, matte
boxes and additional accessories.