P.Lindberg BH-GK002, Оригинальная инструкция пользователя

Страница: 21 / 22

4
MAN 9052979_9052980 EN V5
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 7021 2626 DK-6600 Vejen E-mail: salg@p-lindberg.dk
Installation
1. Hang the lamp from a hook (as shown above). Attach the hook at the spot where the
lamp must hang. The hook must be able to suspend at least 30 kg.
2. Set the ring of the lamp on the hook and suspend the lamp from the ring.
3.
Connect the lamp cord to the power supply according to the following wiring
colour codes:
Brown: L (single phase)
Blue: N (neutral)
Green-yellow: PE (protective earth)
The wiring colours may vary depending on where the installation is made.
The lamp MUST be connected to ground.
Disconnect the power from the outlet to which the lamp is to be mounted.
Leave it to a professional if you are unsure about how the installation is to
be made.
4.
Switch on the power and check that the lamp works properly
If the lamp is mounted at a height above 3 meters, it must be secured to an additional
mounting point, eg. an additional chain or wire.