3
MAN 9061308 EN V1
P. Lindberg A/S
Sdr. Ringvej 1
www.p-lindberg.dk
Tlf: 70212626
DK-6600 Vejen
e-mail: [email protected]
Overview of the equipment
Loading and operation
WARNING:
Ensure you read, understand and apply safety instructions before use.
1.
Connect the wrench to the air hose .
2.
Place the socket over the subject nut and depress the trigger to operate the wrench.
3.
To change direction push the button at the top of the handle. Direction of .R. for reverse
and “F” for forward
4.
The rotation speed is adjusted by pressing the F-button to the desired speed. The button
has three positions, according to the three speeds.
5.
The flow of air may be regulated by adjusting flow valve at the base of the handle.
6.
Ensure the air supply is clean and does not exceed 90psi while operating the wrench. Too
high an air pressure and unclean air will shorten the product life due to excessive wear,
and may be dangerous causing damage or personal injury.
DO NOT use any additional force upon the wrench in order to remove a nut.
DO NOT allow wrench to free run for an extended period of time as this will shorten its life.