P.Lindberg 9032389, Оригинальное руководство

Страница: 73 / 74

17
MAN 9032389 EN V1
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70212626 6600 Vejen, Denmark E-mail: salg@p-lindberg.dk
Part list
Fig.
no.
Item name Quantity Fig.
no.
Item name Quantity
1 Bolt M10x75 1 38 Nut M8 3
2 Flat washer M10 1 39 Spring washer M10 3
3 Spring 1 40 Bolt M10x55 1
4 Adjustment handle
(quantity)
1 41 Guard 1
5 Washer 1 42 Wheel 2
6 Lock nut M10 3 43 Axle 1
7 Locking plate 1 44 Locking pin 1
8 Wing nut set 1 45 Bushing for axle 2
9 Fitting plate for 1 46 Gearbox 1
10 Adjustment handle
(spreader side)
1 47 Drive shaft 1
11 Pin 2 mm 1 48 Bolt M8x50 2
12 Washer M8 18 49 Locking ring, Ø25 4
13 Pin 3.5 x 25 1 50 Cap 1
14 Spring washer M8 20 51 Spreader disc 1
15 Cotter bolt 1 52 Spreader wings 4
16 Guide pin 1 53 Washer M10 1
17 Bolt M8x20 5 54 Adjustment washer
bottom
1
18 Nut M8 18 55 Adjustment washer top 1
19 Washer M10 7 56 Fitting plate 1
20 Washer M12 3 57 Guide bushing 1
21 Nut M10 3 58 Bolt M10x50 1
22 Drawbar 1 59 Agitator 1
23 Spring washer M12 4 60 Lubrication nipple 2
24 Nut lock M12 3 61 Bearing 4
25 Tow bar hitch 1 62 Bottom frame 1
26 Bolt M12x75 3 63 Pin M2x20 2
27 Bolt M8x70 1 64 Bolt M8x16 8
28 Bolt M12x20 2 65 Connection bar 1
29 Sides for hopper 2 66 Bolt M6x16 3
30 Corners for hopper 4 67 Washer M6 3
31 Bolt M6x12 44 68 Washer M6 3
32 Front plate for hopper 1 69 Nut lock M6 3
33 Nut M6 44 70 End piece 1
34 Bolt M10x25 3 71 Lock ring Ø10 1
35 Rear plate for hopper 1 72 Drawbar fitting 1
36 Bolt M8x25 4 73 Lever 1
37 Angle 3