© P.L. Light Systems, 4800 Hinan Drive, Beamsville, Ontario, Canada, L0R 1B1 T: 905.563.4133 Toll Free: 1.800.263.0213 www.pllight.com
NXT_LP_Alpha_Beta_Chain Mt_10.19
PAGE
2 of 3
ATTENTION: Install in accordance with national and local building and electrical codes.
!
!
8
Attach Mounting Bracket
• Lower front of reflector collar onto mounting
bracket hooks.
• Adjust so that bracket is securely inserted
beneath collar.
7
Install Chain in Eyebolt(s)
•
Cut second chain (supplied by others) to appropriate
length for desired mounting height; hang chain over
truss/track.
• Insert S-hook(s) through last link on either end of chain.
• Raise fixture to ceiling and insert free ends of S-hook(s)
in eyebolt(s) on fixture housing.
Alpha / Beta Reflector: Chain Mount
Installation Instructions
NXT-LP
level
9
Level Fixture
• Use integrated level on back of the housing to adjust
the light fixture. Fixture is level when spirit level
bubble is centered.
10
Complete Electrical Connection
• Connect power cord from power supply to fixture.
!
ATTENTION
Always allow ample space above the
installed fixture to ensure good airflow.
This will prevent an excessive build-up of
heat between the fixture and the ceiling
which could result in damage to the
electronics components and/or lamp.
6
Mount Chain & Front Bracket
• Cut chain (supplied by others) to appropriate length
for desired mounting height.
• Hang one chain over truss/track and insert mounting
bracket through final links on both ends of chain.
• Rotate bracket so that hooks are facing downward.
