P.I.T. PMI140-C, Руководство по эксплуатации

Страница: 7 / 24

Inverter Welding Machine
6
►
Pressure of compressed air must be
within reasonable range in order to
prevent damage to small and sensitive
components in the machine.
►
Check internal circuit of welding ma-
chine regularly and make sure the
circuit connections are connected
correctly and tightly (especially plug-
in connector and components).
If scale
and rust are found, please clean it, and
connect again tightly.
►
Prevent water and steam from enter-
ing into the machine. If that happens,
please blow it dry and check insulation
of machine.
►
If welding machine will not be used for
long time, it must be put into the pack-
ing box and stored in dry and clean
environment.
In order to avoid safety hazards, if the power
supply cord needs to be replaced, this must
be done by P.I.T. or by an after-sales service
centre that is authorised to repair P.I.T. power
tools.
Service
►
Have your power tool repaired only by
qualified personnel and only with original
spare parts. This ensures the safety of the
power tool.
The list of authorized service centers can be
viewed on the official website of P.I.T. by the
link: https://pittools.ru/servises/
Storage and transportation
The welding machine should be stored in
closed rooms with natural ventilation at tem-
peratures from 0 to +40 ° C and relative hu-
midity up to 80%. The presence of vapors of
acids, alkalis and other aggressive impurities
in the air is not allowed.
Products can be transported by any type of
closed transport in the manufacturer’s pack-
aging or without it, while preserving the prod-
uct from mechanical damage, atmospheric
precipitation.
Dispose of waste
Damaged power tools, batteries, acces-
sories and waste packaging materials must
be recycled and reused in an environmentally
friendly manner.
Do not throw power tools and accumulators /
batteries into general household waste!
Product serial number interpreta-
tion serial number
The fi rst and second digits of the product seri-
al number from left to right
Year of production, the third and fourth digits
indicate the month of production.
The
fi fth and sixth digits indicate the produc-
tion day.