To Program an X-keys key or foot pedal with a Double-Click:
1.
Switch to program mode.
2.
Press the key (or tap the pedal if programming a Foot Pedal) on the X-keys that will send the
double-click mouse message. Press and hold the
<=>
key, tap the
<1>
key on the
alphanumeric section of the standard keyboard (above the <Q>), and release the
<=>
key.
3.
Press and hold the
<=>
key, tap the
<2>
key on the alphanumeric section of the standard
keyboard (above the <W>), and release the
<=>
key.
4.
Press and hold the
<=>
key, tap the
<1>
key on the alphanumeric section of the standard
keyboard (above the <Q>), and release the
<=>
key.
5.
Press and hold the
<=>
key, tap the
<2>
key on the alphanumeric section of the standard
keyboard (above the <W>), and release the
<=>
key.
6.
Press and hold the
<Esc>
key, tap the <
Left-Ctrl
> key, and release the
<Esc>
key.
8.
Press the same key (or tap the foot pedal) on the X-keys again.
7.
Return the program switch to run or continue to program the other keys.
To Program an X-keys key or foot pedal with multiple single clicks:
1.
Switch to program mode.
2.
Press the key (or tap the pedal if programming a Foot Pedal) on the X-keys that will send the
multiple click mouse message. Press and hold the
<=>
key, tap the
<1>
key on the
alphanumeric section of the standard keyboard (above the <Q>), and release the
<=>
key.
3.
Press and hold the
<=>
key, tap the
<2>
key on the alphanumeric section of the standard
keyboard (above the <W>), and release the
<=>
key.
4.
Continue this process,
<=> <1> <=> <2>
, for the desired amount of mouse clicks.
5.
Press the same key (or tap the foot pedal) on the X-keys again.
6.
Return the program switch to run or continue to program the other keys.
