OZTI OBM 1080 D Скачать руководство пользователя страница 13

13/19

When adding detergent manually, 1 tea spoon full of foamless dishwasher detergent 

should be mixed into water tank 

of the machine after “Boiler  Warning Lamp” and “Storage 

Warning Lamp

” go off and 1 tea spoon full of foamless dishwasher detergent should be 

added to the water tank for every 10 baskets of washing batch.

OPERATION OF THE MACHINE

Firstly coarse food scraps should be wiped away from the dishes to be washed in the 

machine, with a brush or sponge. After pressure water is applied to them, they should 

be placed in the washing baskets and then the cover of the machine should be 

closed. Otherwise excessive food scraps may clog the scrap filters and obstruct wash 

and rinse arms. Never use hot water and detergent in this pre-washing operation of 

wiping and pressure water.

!

“Program selecting key” should be set to 40,90,120,140,180 second cycles,depending on 

the uncleanliness level of the dishes, then the cover should be closed and the machine 
should be operated. 

Between temperatures of  -

5ºC +40ºC and in ambient humidity higher

than 65%, it is reccommended to operate the machine under a chimney hood.

Program Warning Lamp

” goes on when the washing operation starts and it 

goes off after the operation is completed. Clean dishes are ready to be taken out…

Second and subsequent batches of dished are wiped, placed in the baskets and 

inserted into the machine. After the cover is closed, the machine automatically starts 

to operate and same operation se should be carried out as described above.

Clean dishes should be taken from their baskets after 30 seconds and then 
placed into their shelves.

In order that the machine operates efficiently and not to damage the dishwasher, 

baskets appropriate for the dishes should be chosen. Especially forks, spoons and 

knives should be washed in the baskets, which are designed for their use. Baskets different 
from the original ones supplied with the dishwasher and broken baskets should not be used. 

If the cover of the machine is opened for any reason during water intake, 

washing or rinsing operations, the operation will be stopped.

DO NEVER OPERATE THE MACHINE

when scrap and suction filters are removed.

Otherwise coarse scrap particles on the dishes may damage the

machine.

Broken or nonfunctioning scrap and suction filters can be obtained

from our authorized service dealers.

!

After the appliance has not been operated for a long period, it should be first 

cleaned up, cable connections should be checked up, rear propeller of the 

rinsing

pump should be rotated 20-25 times with the help of a screwdriver.

Содержание OBM 1080 D




















Отзывы: