4
OzSpy AHD DVR User Manual
2
Motion
detect
4
Camera
lock
Table1
Preview icon
6 Recording Config
Set the recording parameters in the surveillance channel. You can enter [Main Menu]>
[Record]> [Record Config] to set. The system’s default setting is 24 hours continuous
recording.
Note: There is at least one read-write hard disk if the DVR records normally.
Picture 2
Channel
- Choose the corresponding channel number to set the channel. Choose the “all”
option to set all channels.
Redundancy
- Choose the recording file and backup in two hard disks. The first one is read-
write disk, the other is redundant disk.
Length
- Set the time length of each video file. 60minutes is default length.
PreRec
- Record 1-30 seconds before the action. (file length is decided by the code stream)
Schedule -
Record according to the set video type (regular, detect and alarm) and time section.
Manual -
Click the “all” button and the corresponding channel will record no matter what state
it is in.
Stop -
Click the “stop” button to stop the recording in any state.
