EN
21
20
If using a Saucisse pack go to Step 8.
Step 7. Now place the folded wing into the stuff sack.
Step 4. Group together the middle/trailing
edge of the wing by sorting the folds near
the B, C and D tabs.
Step 6. Fold the wing with 3 or 4 folds whilst being
careful to not crush the LE.
Step 5. Once the LE and rear of the wing have
been sorted, turn the whole wing on its side.
Step 8. If using a Saucisse, with the wing laid
on its side carefully close the zip (or clips)
without trapping any material.
Step 9. Make the first fold just after the LE reinforcements.
Do not fold the plastic reinforcements, use 3 or 4 folds around
the LE.
IMPORTANT
: Do NOT lay the wing
flat on the ground before packing the
glider, this will cause abrasion damage
to the top surface as you pull the glider
towards the middle. ALWAYS pack from
a mushroom or lift the wing off the
ground when gathering the wing and
grouping the leading edge.
IMPORTANT
: Do not fold the glider in the centre, you
will bend the plastics, instead pack the wing with a full
concertina method from tip to tip before packing into the
stuff sac.
Содержание SwiftMax
Страница 1: ...Pilots Manual ...
Страница 2: ......
Страница 19: ...1258 Route de Grasse Le Bar sur Loup 06620 France ...