Ozone Speedster 2, Руководство пилота

Страница: 13 / 20

CARE AND MAINTENANCE
EN
21
20
Step 1
. Lay mushroomed wing
on the ground. It is best to start
from the mushroomed position
as this reduces the dragging
of the leading edge across the
ground.
Step 2. Group LE reinforcements
with the A tabs aligned, make
sure the plastic reinforcements
lay side by side.
Step 3. Lay wing on its side and Strap
LE...Note the glider is NOT folded
in half; it is folded with a complete
concertina from tip to tip. It is really
important to not stress the middle cell or
bend the plastic too tightly.
Packing
To prolong the life of your wing and to keep the plastic reinforcements in the best possible condition it is very important to
pack the wing carefully.
Ozone recommends to use the concertina packing method exactly as shown so that all of the cells rest alongside each
other and the plastic reinforcements are not unnecessarily bent. Using an Ozone Saucisse or Saucisse light pack will help
preserve the life of the wing and aid with the speed and ease of packing.
If using a Saucisse pack go to Step 8.
Step 7. Now place the folded wing into the stuff sack.
Step 4. Group together the middle/trailing
edge of the wing by sorting the folds near
the B, C and D tabs.
Step 6. Fold the wing with 3 or 4 folds whilst being
careful to not crush the LE.
Step 5. Once the LE and rear of the wing have
been sorted, turn the whole wing on its side.