ELIMINATION OF PROBLEMS
If you suspect that there may be a problem with your unit, check
the following:
● The unit is properly connected.
● The ceramic plates are clean and dry.
● There are no cracks in the plates, and each plate is aligned with
the rear part of the unit.
● It is important that the ozone generator is properly earthed, in
order to prevent injury by electric current.
● The fuse is installed correctly, and in a good condition.
When replacing the fuse, pull out the plastic fuse holder, take out
the old fuse and insert the new one. The replacement fuse must
be 1-ampere (0.79 inches). See the picture below:
Caution: You should not try to remove the unit cover, because there
are no parts which the user could repair themselves. Opening the unit
voids the warranty.
7
