OZOFRESH Eclipse Pro, Инструкция по эксплуатации

Страница: 11 / 16

EN
11
HOW TO OPERATE YOUR ECLIPSE PRO cont..
Occasionally, even after a full cycle, there may still be a residual
smell of ozone in the air. A slight smell is normal but if it is too
strong, it may be necessary to carry out a further destruct only
cycle. To do this, simply press the 15 & 30 buttons together
on the top panel. Once the destruct only cycle has started it
is recommended that you leave the room until the cycle has
completed.
Please note: you must press the 15 & 30 buttons at the same
time. In the destruct only cycle you will notice that the machine
does not make the distinctive ‘hissing’ noise it makes when
producing O3
How to carry out additional destruct cycle
Operating times
Choosing an operating time for your Eclipse Pro is very much
dependent on the size of the room to be treated, degree of
odour within the room, level of soft furnishings and ventilation
within the room. Below we offer you a rough guideline to assist
with your choice:
Cycle Time (mins) Approx. Room Size (m3)
15 45m3
30 65m3
45 95m3
60 120m3
90 160m3
120 200m3
Please call your supplier if you require advice on the cycle time
selection.
Where room
temperature
exceeds 30
° C,
or when
humidity is
over 75%, the
treatment time
should be
extended.