background image

Wet Vacuuming

Use the 

foam filter for wet 

vacuuming

.

1.  Slip the foam filter over the 

filter cage on the bottom 

of the motor unit. Ensure 

that no air can be sucked 

through the filter cage 

without being filtered.

Note: 

Do not use the pleated 

filter or dust bag when 

vacuuming liquids.

WARNING! 

WHEN WET VACUUMING, SWITCH OFF THE 

EQUIPMENT IF LIQUID OR FOAM IS EMITTED WITH THE 

EXHAUST AIR.

WARNING! 

THE VACUUM IS NOT SUITABLE FOR THE 

VACUUMING OF COMBUSTIBLE LIQUIDS.

WARNING! 

ENSURE THE VACUUM IS COMPLETELY 

DRY BEFORE DRY VACUUMING AGAIN.

Dry Vacuuming

Use the 

cartridge filter for dry 

vacuuming

.

1.  Press the open end of the 

cartridge filter over the filter 

cage until it is completely 

covered. No air should be 

pulled through the unit 

without being filtered.

Note:

 Do not use the foam filter 

when vacuuming dry matter.

2.  To remove the filter, grasp  the hard plastic rim of the filter and 

pull it off the filter cage. 

Fitting A Dust Bag

For vacuuming fine, dry dirt it is recommended that you fit a dust 

bag (up to 25L). This will ensure that the filter bag does not clog 

up as quickly and help maintain the vacuuming power. 

A dust bag is suitable for dry 

vacuuming only. 

Using the dust bag 

makes it easier to dispose of collected 

dust.

1.  To attach, slip the dust bag over the 

vacuum inlet on the inside of the tank.

Draining Liquids From The Tank

Spills and puddles can be vacuumed directly into the tank with the 

addition of the foam filter for easy clean up and disposal.

1.  Hold the vacuum over a laundry sink or household drain.

Note: 

Only dispose of liquid waste into household sinks & drains 

if safe to do so. Improper disposal of hazardous waste can cause 

pollution and harm.

2.  Turn the drain outlet cap anti-

clockwise to loosen and remove it.

3.  Allow any collected liquid in the tank to flow out. Tip the vacuum 

slightly to allow any liquid at the bottom of the tank to flow out 

too.

4.  Replace the drain outlet cap and rinse out the tank if necessary.

2. FILTER SELECTION

3. WASTE DISPOSAL

WARNING! 

NEVER USE THE WET & DRY VACUUM 

WITHOUT A FILTER. ALWAYS ENSURE THAT THE 

FILTERS ARE ATTACHED SECURELY.

Содержание VWD-1425PT









Отзывы: