ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Safety Striker Pin
2 Nosepiece
3 Magazine Window
4 On/off Trigger
5 Handle
6 Power Switch
7 Magazine Latch
STAPLE NAIL GUN
KNOW YOUR PRODUCT
1. LOADING STAPLES
1. Hold the tool upside down.
3. Insert a row of
staples into the
opening behind the
nose piece.
2. Squeeze the magazine latch and pull the magazine out of the
tool.
8 18g T-Brad Nails (15mm) x 100
9 18g T50 Staples (10mm) x 1500
ACCESSORIES
SETUP & PREPARATION
Ensure the tool is disconnected from the power supply
before performing any of the following operations.
4. Push the loaded magazine back into the unit until it clips into
place.
a
b
NOTE:
THIS STAPLER ONLY ACCEPTS T50
18 GAUGE STAPLES. OTHER TYPES OF STAPLES,
INCLUDING PAPER STAPLES, WILL JAM THE UNIT.
NOTE:
Rows of staples longer than 120mm do not fit in the staple
nail gun.