Ozito SGP-300, Инструкция по эксплуатации

Страница: 16 / 19

15
TROUBLE SHOOTING
Problem Cause Remedy
Little or no material
flow Nozzle clogged Clean
Suction tube clogged Clean
Material spray regulator dial setting
turned too low (-) Increase spray regulator dial
setting (+)
Suction tube loose Insert
No pressure build up in paint pot Tighten paint pot
Air filter clogged Clean or replace
Material leaking Nozzle loose Tighten
Nozzle worn Replace
Nozzle seal worn Replace
Atomization is too
coarse Viscosity of material too high Thin
Material volume too large Decrease spray regulator
dial setting (-)
Material volume setting too high (+) Decrease spray regulator
dial setting (-)
Nozzle clogged Clean
Air filter clogged Clean or replace
Spray jet pulsates Material in paint pot running out Refill
Air filter clogged Clean or replace
Applying too much material Adjust material flow or
increase movement of
spray gun
Too much overspray Gun too far from spray object Reduce distance
Pattern is very light
and splotchy Moving the spray gun too fast Adjust material flow or
decrease movement of
spray gun
Too much material applied Decrease spray regulator
dial setting (-)
Material build-up on air cap and nozzle Clean
Too little pressure build-up in container Tighten paint pot
Pattern runs or sags