ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Bit Holder
2 LED Worklight
3 Bit Cartridge
4 Bit View Window
5 Forward / Reverse Trigger
6 Charge Indicator LED
7 Charging Socket
8 Sure Grip Handle
9 Loading Switch
CORDLESS SCREWDRIVER
KNOW YOUR PRODUCT
1. CHARGING
1. Plug the charging adaptor into a
power socket.
2. Insert the charging jack into the
charging socket on the screwdriver
3. Turn on the power point and a red
light on handle of the screwdriver
will illuminate when properly
connected and charging.
10 Charging Adaptor
11 Charging Jack
12 Driver Bits x 12
ACCESSORIES
SETUP & PREPARATION
To reduce the risk of electric shock, this product must be
used with a residual current device (rated at 30mA or less).
Note: It will take 4-5 charging cycles before the battery reaches
optimum charge and run time.
